Silicon Carbide Wear Components
SiC Tubes, Rings & Plates
High-performance silicon carbide components engineered for severe abrasion, corrosion, thermal shock and high-temperature industrial service.
Shandong Anda Industrial supplies factory-direct SiC wear components for mining, mineral processing, power generation, cement, steel and chemical processing applications.
Product Forms
Components configured for critical wear points.
Select a standard product form or share your drawings for a custom geometry, tolerance and installation solution.
01 / Tubes
SiC Tubes
Internal liners, furnace tubes, protection sleeves and transport components for abrasive or corrosive media.
02 / Rings
SiC Rings
Wear rings, sealing components and engineered protection parts designed for dimensional stability and long service life.
03 / Plates
SiC Plates
Flat wear plates and fabricated panels for chutes, hoppers, cyclones, transfer points and high-temperature equipment.
Technical Parameters
Material performance designed for severe service.
Final values depend on the selected SiC grade, manufacturing method, geometry and operating conditions. Our engineering team can confirm the specification for your application.
Available configurations
- -- Reaction-bonded and sintered SiC options
- -- Custom shapes, holes, grooves and interfaces
- -- Drawing review and application-based selection
| Parameter | Typical Value | Project Note |
|---|---|---|
| SiC content | According to grade | Selected for wear, thermal or chemical duty |
| Bulk density | 2.6-3.1 g/cm³ | Grade-dependent |
| Hardness | High Mohs hardness | For severe sliding abrasion |
| Service temperature | Up to approximately 1,380°C | Depends on atmosphere and grade |
| Water absorption | Low to negligible | Suitable for wet-process environments |
| Manufacturing | Molded or machined | Custom dimensions available |
| Typical thickness | Application dependent | Confirmed from drawings and wear rate |
Typical data only. Please request a project-specific datasheet before final selection.
Applications & Advantages
Protection where abrasion and heat cannot be ignored.
Mining & Slurry
Cyclones, slurry lines, chutes, pumps and transfer points.
Power Generation
Ash handling, coal systems and high-temperature process equipment.
Cement & Steel
Hoppers, separators, feed systems and abrasive material routes.
Chemical Processing
Corrosive, erosive and thermally demanding process environments.
- ✓ Excellent resistance to severe sliding abrasion
- ✓ Strong corrosion and chemical resistance
- ✓ Low friction and reduced material build-up
- ✓ Extended component life and lower maintenance frequency
Application-Based Support
Need the right SiC solution for your wear point?
Send us your drawings, dimensions, material characteristics, temperature and operating data. Our engineering team will recommend a suitable product form and configuration.